Oil Immersed (Oil Cooled) Transformers 10KVA to 5000KVA

distribution-transformersM-Tech offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. M-Tech liquid filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. Click on the products below for more information.
transformer-polemountedM-Tech oil-filled, pole-mounted distribution transformers are specifically designed for servicing residential overhead distribution loads. They are also suitable for light commercial loads, industrial lighting and diversified power applications. Our pole mounted transformers ranges from 5 KVA to 300 KVA ratings at 33 KV max system voltage as per IEC, ANSI, NEMA, IEEE specifications.
  M Tech offers a wide range of protective capabilities to meet nearly every application as per requirements & specificationss i.e
  Installed in the transformer housing:Bay O Net Fuses, Current Limiting Fuses, HV side Tap Changer, Plug in Bushings, etc.
  Externally fixed : LV breaker, Arrester , Thermometer with Alarm & trip contacts , Pressure Relief Device , Bochholz Relay , Pressure Vacuum Gauge , LV/HV Bushing , Conservator with breather , etc.
  For more info, please refer to our catalog at download section.
transformer-SubstationsM-Tech Medium Power Unit Substations can be use indoor or outdoor, with a selection of high-voltage incoming sections, a choice of transformer types, and an arrangement of Switchgear to suit the application. Most switchgear assemblies are configured as unit substations. Unit substations follow the system concept of locating transformers as close as practicable to areas of load concentration at utilization voltages, thus minimizing the lengths of secondary distribution cables and buses.

Main features:

  • Lengths of cables and buses are minimized, reducing the likelihood of faults and improving voltage regulation.
  • A specific arrangement of switchgear minimizes installation expenses.
  • Availability of non-flammable types of transformers eliminates necessity of vaults.
  • Complete coordination, both mechanical and electrical, provides for improved service continuity.
  • Wide choice of components and ratings to meet exact application requirements allows for extreme flexibility.


All designs incorporate the latest advances in materials, design techniques, and power transformer technology verified with 2D and 3D analysis software. M-Tech has well-trained engineers, winders, assemblers, and testers, with many years of experience in the development, design, and manufacture of medium power transformers.

The transformers are available in live-front end or dead-front end design. Offerings include; delta and wye configurations, single or series-multiple combinations with taps (for de-energized operation), or no-taps. Step-down & Step up designs are also available up to 5000 KVA ratings at 33 KV max system voltage.

Installed In The Transformer Housing: Bay O Net Fuses, Current Limiting Fuses , Two position LBS, HV side Tap changer, etc.

Externally Fixed : LV breaker , Arrester , Thermometer with Alarm & trip contacts , Pressure Relief Device , Bochholz Rely , Pressure Vacuum Gauge , LV/HV Bushing , Conservator With Breather , Forced-Air Cooling with automatic control system or provisions for forced-air cooling etc.

For more info, please refer to our catalog at download section.
transformer-padmountedM-Tech three phase Pad-Mounted Transformers are compact power centers for utility, commercial, or industrial applications. These transformers are proper designed to withstand all environmental hazards and can be located inside or outside buildings for greater flexibility and savings. These transformers meet all applicable standards i.e IEC, ANSI, NEMA, IEEE. The transformers are available in live-front end or dead-front end design. Offerings include; delta and wye configurations, single or series-multiple combinations with taps (for de-energized operation), or no-taps. Step-down & Step up designs are also available up to 5000 KVA ratings at 33 KV max system voltage. M Tech offers a wide range of protective capabilities to meet nearly every application as per requirements & specifications i.e Installed In The Transformer Housing: Bay O Net Fuses, Current Limiting Fuses , Two position LBS, HV side Tap changer, etc. Externally Fixed : LV breaker , Arrester , Thermometer with Alarm & trip contacts , Pressure Relief Device , Bochholz Rely , Pressure Vacuum Gauge , LV/HV Bushing , Conservator With Breather , Forced-Air Cooling with automatic control system or provisions for forced-air cooling etc. For more info, please refer to our catalog at download section.


Dry Type Transformers 10KVA to 2500KVA

dry-type-transformers

DUPONT NOMEX PAPER BASED INSULATION SYSTEM

M-TECH introduces a series non-encapsulated dry-type transformers with the US DuPont Reliatran technology and adopt DuPont NOMEX paper based insulation system, which is safe and reliable, environmentally friendly, energy saving, fireproof and blast proof. Insensitive to humidity dust and pollution, and of great surge capacity, small dimension and easy maintenance.

CAST RASIN INSULATION SYSTEM

Holding the expertise we are manufacturing and supplying a huge assort of Cast-Resin Transformer. Keenly in accordance with the International standards these transformers are fabricated to ensure its reliability and trustworthiness. The vital features of these transformers are low partial discharge and matchless electric intercity, flame resistance, high performance and reduced maintenance.

TECHNICAL SPECIFICATION

These are the technical specifications for all Step Up, Step Down 20KV, 15 KV,11 KV, 6.6KV, 3.3 KV / 415 V, 220 V, Dy, Yd, Single & Three phase transformers.

dry-type-transformers-specifications